Pulverizing Equipments

De Lumper a simplified version of Pre Crushers are recommended to crush materials containing small percentage of lumps or agglomerates into uniform coarser material. Generally delumpers are used for lighter duties like mounting in-line with secondary grinding mill or de-agglomeration applications. A single cam shaft with bottom screen crushers material efficiently.

Mill Category	Screen Type
Model Type	DL-250	DL-500
Motor Horse Power(H.P.)	2	5
Capacity (Kg/hr/operation)Upto	100 to 1000
Max.permissible feed size(mm)	50	50
Fineness range	Less than 10 mm
Abrasiveness & Hardness handled	Medium & upto 2 on Moh's Scale

Pre Crushers ideally reduces irregularly shaped lumps of soft to medium hard even slightly damp in nature to smaller sized lumps. Generally pre-processed materials particularly containing large percentage of bigger lumps. Pre Crushers are not suitable for hard materials like wood, stones, metals, ores, etc. Inward-opposite rotating cams crush the material on the slotted grate.

Mill Category	Screen Type
Model Type	PC-250	PC-450
Motor Horse Power(H.P.)	7.5	15
Capacity (Kg/hr/operation)Upto	250 to 5000
Max.permissible feed size(mm)	100	150
Fineness range	Less than 25 mm
Abrasiveness & Hardness handled	Medium & upto 3 on Moh's Scale

Hammer Crushers are employed to disintegrate almost everything, from paper to limestone and from spices to metal ores. Traditional disintegrators are technologically replaced by these modern and highly versatile hammer mill crushers, having total flexibility.

Combination of different hammer styles, liner plates, sieve inserts and wear resistance technology offer almost unlimited possibilities of crushing lumpy, bulky, irregularly shaped, hard & fibrous materials, into coarse to medium fine powders.

Materials enter at periphery of swing hammers undergoing size reduction along liner plates before discharging through perforated sieve at bottom. Replaceable bar type grates available for specific applications.

Mill Category	Screen Type
Model Type	HC-01	HC-03	HC-05
Motor Horse Power(H.P.)	7.5 - 10	15 - 30	40 - 75
Capacity (Kg/hr/operation)Upto	50 to 7500
Max.permissible feed size(mm)	30	50	50
Fineness range	4 TO 60 mesh B.S.S & Finer
Abrasiveness & Hardness handled	Medium & Upto 3 on Moh's Scale

Universal Mills are recommended for medium to fine grinding of soft to semi-hard materials. Appropriately sized mill chamber prevents buildup of deposits and blockage of the mill body by fatty & sticky products. Cool powdering operation retain vital properties like colour, taste, flavour etc. to its optimum level. Changeable grinding elements offer versatility to cater applications like pulverising, defiberizing, wet grinding, mixing, deaglomeration, dispersion, hot air drying etc. This is of paramount importance to the user.

Centrally fed material gets powdered step by step between rotor and stator, moving radially outward for a bottom discharge through sieve. Clearance, configuration & grinding element design determines end results.

Mill Category	Screen Type
Model Type	PP-302	PP-452	PP-602
Motor Horse Power(H.P.)	10 - 15	20 - 30	40-60
Capacity (Kg/hr/operation)Upto	100 to 4000
Max.permissible feed size(mm)	10	10	10
Fineness range	30 TO 150 mesh B.S.S & finer
Abrasiveness & Hardness handled	Low & Upto 3 on Moh's Scale

Mikro Pulverizers conventional in design has it's own advantages for various applications. A built-in water circulation jacket retains grinding temperature lower than otherwise. Design provides for admitting extra air during grinding to facilitate cool operation. Soft to medium hard materials are quickly pulverized to fine powder. Improved mixing and dispersion are added advantages of such mills. Quite popularly, it is also called High Speed close tolerance Hammer Mill.

Uniformly fed material undergoes a complex grinding force through attrition between liner plate & hammer tip impact of high speed hammers and collision between particles. Bottom sieve controls the particle size.

Mill Category	Screen Type
Model Type	MP-01	MP-02	MP-31
Motor Horse Power(H.P.)	5-7.5	10-20	30-40
Capacity (Kg/hr/operation)Upto	100 to 4000
Max.permissible feed size(mm)	10	10	10
Fineness range	30 TO 150 mesh B.S.S & finer
Abrasiveness & Hardness handled	Low & Upto 3 on Moh's Scale

Plastic Grinding Mill (Screen Type) a system ideally suitable for economical grinding of granules, pallets or pre-cuts. Heat sensitive, elastic and tough materials are handled with ease for excellent powder characteristics to suit ultimate processes. '' results, with increased surface area, higher bulk density and better dispersion quality. Such powders are in use for Master Batch, Rotational Moulding, Textile/ Micro-dot coating & Hot-Dip, Wire Coating and many more applications. Unique auto servo control to monitor feed rate sensing temperature & current, Material is preferred between serrated rotor & liner screen controls the particle size. Cool grinding operation and minimum residual time optimizes productivity and system efficiency. Coarse to medium fine powders (16 Mesh Bss tp -85 Mesh Bss) in single stage system and fine powders (52 Mesh BSS to - 150Mesh BSS) in two stage system, with capacities in the range of 20-300 kgs/hour,depending upon material type, its grade and MFI, with narrow particle size distribution and good flowability. Applications catered in general are PE, PVC, PC, EVA, UHMWPE, SAN, ABS etc.

Mill Category	Screen Type
Model Type	PGM-301	PGM-451	PGM-601
Motor Horse Power(H.P.)	10-15	20-30	40-60
Fineness range (One stage operation)	16-52 mesh B.S.S.
Fineness range (Two stage operation)	85 mesh B.S.S
Abrasiveness & Hardness handled	Low & Upto 3 on Moh's Scale