Kaps Engineers
Vadodara, Gujarat
SEND SMS
SEND EMAIL

Pulverizing Systems

Pulverizing Systems  
On selection of Size Reduction Equipments, the pulverizing systems is to be selected depending upon application material, its physical properties, capacity, fineness requirement etc.
The Pulverizing System consists of
a)    Feeders / feed conveyors for feeding to mill,

b)    Size Reduction Equipment,

c)    Collection System (Batch Collection System & Continuous Collection System),

d)    Conveying System (Pneumatic Conveying System / Gravity Collection System)

e)    Dust Collector (Open Type Dust Collector / Pulse Jet Dust Collector) 

f)     Rotary Air Lock Valve 

 The systems are basically Batch Type and Continuous Type :

  • For small capacity from 25 Kgs. / Hr. to 200 Kgs. / Hr., BHBBatch Type system is suitable. 
  • For larger capacity of more than 200 Kgs. / Hr., Continuous Type system is suitable. 

 Continous Type Systems are further classified as under :

  • Single Stage Grinding
  • Two Stage Grinding
  • Three Stage Grinding

 Number of stages of grinding depends on Application Material and its Properties. 

 Single Stage Grinding

 Available in Batch Type Collection System  & Continuous Type Collection System

 2 Stage Grinding System  

 Available in Batch Type Collection System & Continuous Type Collection System

 A) Batch Type Collection System : In this system the equipments will be of Batch Type Stand Alone Equipments where feeding will be from top and collection will be at bottom.  Both feeding and collection will have to be done manually independently.  When the drum is filled up, equipment will have to stop, replace the drum by another empty drum and then equipment to re-start and so on.  That is why this system is known as Batch Type System.

 B) Continuous Collection System : In this system feeding and powder collection are done on continuous basis uninterruptedly.

 

 

Gravity System With Open Type Dust Collector

Gravity System With Open Type Dust Collector
  • Gravity System With Open Type Dust Collector
Ask For Price
Product Price :Get Latest Price

Product Details:

Minimum Order Quantity1 Piece
Surface treatmentColor plated
Capacity2000 kgs/hr
TypeGravity Separator
Automatic GradeAutomatic
Power SourceElectrical
MaterialStainless Steel

Gravity Collection System with Open Type Dust Collector

  • Gravity Collection System is a continuous system.

  • System consists of Conveyor, Mill with Gravity Collection System, Rotary Air Lock Valve and Open Type Dust Collector.

  • Dust Collector is provided with open type filter bags for dust less environment.

  • Here Mill mounted at height of 2 to 2.5 Mtrs.

  • Feed height of 3 to 3.5 Mtrs.

  • Powdered material is collected through Rotary Air Lock Valve and Two Way Discharge.

  • Suitable for capacity upto 2000 kgs/hr for different application.

  • Different Feeding Conveyors available for Uniform Consistent feeding to Mill.

  • Suitable for frequent change over of Products and Hygroscopic material.

  • Rotary Air Lock Valve is provided for dust less environment.


Salient Features :

  • Provide Customized Grinding Solution.

  • Narrow band Particle Size Powder Distribution.

  • Provision to introduce Chilled air and water for Cool Grinding.

  • Low Power Consumption and Maintenance.

  • Minimum handling of material to avoid product loss.

  • Available in Stainless Steel Contact Parts and Stainless Steel GMP Grade.

  • Wide range of Equipments.

  • Equipment available for Dustless Environment.

  • Can handle Heat Sensitive and Hygroscopic Material.

  • Experience of over 7000 Material Trial Tests Installations.

  • Full Fledge Trial Test Facility Available.

¿¿

Note :

To understand your exact requirement of your application, we request you to please send the enquiry indicating name of the feed material, capacity, fineness required, and properties of the feed material.

Request
Callback
Send Bulk Enquiry

Gravity System With Pulse Jet Dust Collector

Gravity System With Pulse Jet Dust Collector
  • Gravity System With Pulse Jet Dust Collector
Ask For Price
Product Price :Get Latest Price

Product Details:

Minimum Order Quantity1 Piece
Capacity2000 kgs/hr
MaterialStainless Steel
SurfaceColor Plated
Power SourceElectricity
ModeAutomatic

Gravity Collection System with Pulse Jet Dust Collector

  • Gravity Collection System is a continuous system.

  • System consists of Conveyor, Mill with Gravity Collection System, Rotary Air Lock Valve and Pulse Jet Dust Collector.

  • Dust Collector is a closed type Pulse Jet Dust Collector for dust less environment.

  • Here Mill mounted at height of 2 to 2.5 Mtrs.

  • Feed height of 3 to 3.5 Mtrs.

  • Powdered material is collected through Rotary Air Lock Valve and Two Way Discharge.

  • Suitable for capacity upto 2000 kgs/hr for different application.

  • Different Feeding Conveyors available for Uniform Consistent feeding to Mill.

  • Suitable for frequent change over of Products and Hygroscopic material.

  • Rotary Air Lock Valve is provided for dust less environment.


Salient Features :

  • Provide Customized Grinding Solution.

  • Narrow band Particle Size Powder Distribution.

  • Provision to introduce Chilled air and water for Cool Grinding.

  • Low Power Consumption and Maintenance.

  • Minimum handling of material to avoid product loss.

  • Available in Stainless Steel Contact Parts and Stainless Steel GMP Grade.

  • Wide range of Equipments.

  • Equipment available for Dustless Environment.

  • Can handle Heat Sensitive and Hygroscopic Material.

  • Experience of over 7000 Material Trial Tests Installations.

  • Full Fledge Trial Test Facility Available.


Note :

To understand your exact requirement of your application, we request you to please send the enquiry indicating name of the feed material, capacity, fineness required, and properties of the feed material.

Request
Callback
Send Bulk Enquiry

Twin Grinding System

Twin Grinding System
  • Twin Grinding System
Ask For Price
Product Price :Get Latest Price

Product Details:

Minimum Order Quantity1 Piece
CapacityCapacity upto 1500 kgs/hr
DesignStandard
BrandVM

Twin Grinding System

  • A Continuous pneumatic conveying system.
  • Suitable for high capacity requirement
  • Low feeding height enables easy manual feeding.
  • System consists of Twin Mills with common Pneumatic Conveying System, Cyclone Separator, Separate Blower, Rotary Air Lock and Open Type Dust Collector.
  • System consists of Conveying System, Cyclone Separator, Separate Blower, Rotary Air Lock Valve and Open Type Dust Collector.
  • Dust Collectors available in Open Type and closed type Pulse Jet Dust Collector.
  • Dust Collectors are provided with filter bags for dust less environment.
  • Mills mounted on Anti Vibration Mounting Pads to avoid foundation and vibrations.
  • Suitable for capacity upto 1500 kgs/hr.
  • Frequent change of product is not recommended as cleaning is difficult.
  • Different feeding conveyors available for uniform consistent feeding to mill.
  • Rotary Air Lock Valve is provided for dust less environment.
  • System can be provided with chilled air and water facility for retaining properties of material.
  • Available in contact parts Stainless Steel material.
  • Capacity vary from material to material and type kind of material.
  • On line sieving is possible.


Salient Features :
 

  • Provide Customized Grinding Solution.
  • Narrow band Particle Size Powder Distribution.
  • Provision to introduce Chilled air and water for Cool Grinding.
  • Low Power Consumption and Maintenance.
  • Minimum handling of material to avoid product loss.
  • Available in Stainless Steel Contact Parts and Stainless Steel GMP Grade.
  • Wide range of Equipments.
  • Equipment available for Dustless Environment.
  • Can handle Heat Sensitive and Hygroscopic Material.
  • Experience of over 7000 Material Trial Tests Installations.
  • Full Fledge Trial Test Facility Available.

Note :

To understand your exact requirement of your application, we request you to please send the enquiry indicating name of the feed material, capacity, fineness required, and properties of the feed material. For more details, please visit our website :

 

Request
Callback
Send Bulk Enquiry

Customized Grinding Systems

Customized Grinding Systems
  • Customized Grinding Systems
Ask For Price
Product Price :Get Latest Price

Product Details:

Minimum Order Quantity1 Piece
BrandVM

Customized Grinding System

  • A Continuous grinding system
  • System consists of Single Stage, 2 Stage or 3 Stage grinding operations.
  • System consists of Conveying System, Cyclone Separator, Separate Blower, Rotary Air Lock Valve and Open Type Dust Collector.
  • Dust Collectors available in Open Type and closed type Pulse Jet Dust Collector.
  • Mills mounted on Anti Vibration Mounting Pads to avoid foundation and vibrations.
  • Suitable for capacity upto 2500 kgs/hr.
  • Frequent change of product is not recommended as cleaning is difficult.
  • Different feeding conveyors available for uniform & consistent feeding to mill.
  • Rotary Air Lock Valve is provided for dust less environment.
  • System can be provided with chilled air and water facility for retaining properties of material.
  • Available in contact parts Stainless Steel material.
  • On line sieving is possible.
  • Provide customized grinding solution as per the need of the customer and site conditions.

Salient Features :

  • Provide Customized Grinding Solution.
  • Narrow band Particle Size Powder Distribution.
  • Provision to introduce Chilled air and water for Cool Grinding.
  • Low Power Consumption and Maintenance.
  • Minimum handling of material to avoid product loss.
  • Available in Stainless Steel Contact Parts and Stainless Steel GMP Grade.
  • Wide range of Equipments.
  • Equipment available for Dustless Environment.
  • Can handle Heat Sensitive and Hygroscopic Material.
  • Experience of over 7000 Material Trial Tests & Installations.
  • Full Fledge Trial Test Facility Available.

Note :

To understand your exact requirement of your application, we request you to please send the enquiry indicating name of the feed material, capacity, fineness required, and properties of the feed material. For more details, please visit our

Request
Callback
Send Bulk Enquiry

Three Phase Pulverizers

Three Phase Pulverizers
  • Three Phase Pulverizers
Ask For Price
Product Price :Get Latest Price

Product Details:

ConditionNew
PhaseThree Phase
Product TypePulverizers

Our provided range Three Phase Pulverizers  is rigorously tested by the team of our professionals. Furthermore, our clients can avail this pulverizer from us at market leading prices.

Features:
  • Strongly built
  • Rust resistance
  • Long operational life
Request
Callback
Send Bulk Enquiry

2 Stage Continuous Grinding System

2 Stage Continuous Grinding System
  • 2 Stage Continuous Grinding System
  • 2 Stage Continuous Grinding System
  • 2 Stage Continuous Grinding System
Ask For Price
Product Price :Get Latest Price

Product Details:

Minimum Order Quantity1 Piece
Stages2
Automatic GradeAutomatic
MaterialStainless Steel
Capacity1500 kgs/hr
Automation Grade Automatic

2 Stage Continuous Grinding System
  • A Continuous pneumatic conveying system.

  • Low feeding height enables easy manual feeding.

  • System consists of 3 Stage grinding operations i.e. 1st stage Mill for coarse grinding, 2nd stage Mill for medium fine grinding and 3rd stage Mill for fine grinding.

  • System consists of Conveying System, Cyclone Separator, Separate Blower, Rotary Air Lock Valve and Open Type Dust Collector.

  • Dust Collectors available in Open Type and closed type Pulse Jet Dust Collector.

  • Dust Collectors are provided with filter bags for dust less environment.

  • Mills mounted on Anti Vibration Mounting Pads to avoid foundation and vibrations.

  • Suitable for capacity upto 1500 kgs/hr.

  • Frequent change of product is not recommended as cleaning is difficult.

  • Different feeding conveyors available for uniform & consistent feeding to mill.

  • Rotary Air Lock Valve is provided for dust less environment.

  • System can be provided with chilled air and water facility for retaining properties of material.

  • Available in contact parts Stainless Steel material.

  • Capacity vary from material to material and type & kind of material.

  • On line sieving is possible.

Salient Features :

  • Provide Customized Grinding Solution.

  • Narrow band Particle Size Powder Distribution.

  • Provision to introduce Chilled air and water for Cool Grinding.

  • Low Power Consumption and Maintenance.

  • Minimum handling of material to avoid product loss.

  • Available in Stainless Steel Contact Parts and Stainless Steel GMP Grade.

  • Wide range of Equipments.

  • Equipment available for Dustless Environment.

  • Can handle Heat Sensitive and Hygroscopic Material.

  • Experience of over 7000 Material Trial Tests & Installations.

  • Full Fledge Trial Test Facility Available.

  • Brand: VM
Request
Callback
Send Bulk Enquiry
X

Explore more products



Reach Us
Amish Mehta (Marketing Director)
831, Tarsali
Vadodara- 390010, Gujarat, India



Call Us

Share Us

F GT L


Send E-mailSend SMS